Holographyforum.org / holowiki.org

nice thank you very much

Nice, thank you

yes, the mix of the R+G beams are more of a greenish yellow .. because it has a higher red sensitivity. the beams was spread with a fiber negative lens with the curved side toward the beams and the flat side toward the plate angle of the beam was about 30% to the plate. expose was about 5 mins. you can see visually the change in the polymer as you expose it. then set out in the sun to bleach out the dyes

Nice work, can you detail a bit the recording conditions?
Thx

i chose this object because it made a good hologram in silver fuji, and its much brighter done in the polymer

this is my test of Geola plymer using fiber lens to even out the color mix