by dannybee » Mon May 04, 2020 4:42 pm
yes, the mix of the R+G beams are more of a greenish yellow .. because it has a higher red sensitivity. the beams was spread with a fiber negative lens with the curved side toward the beams and the flat side toward the plate angle of the beam was about 30% to the plate. expose was about 5 mins. you can see visually the change in the polymer as you expose it. then set out in the sun to bleach out the dyes
yes, the mix of the R+G beams are more of a greenish yellow .. because it has a higher red sensitivity. the beams was spread with a fiber negative lens with the curved side toward the beams and the flat side toward the plate angle of the beam was about 30% to the plate. expose was about 5 mins. you can see visually the change in the polymer as you expose it. then set out in the sun to bleach out the dyes