Holographyforum.org / holowiki.org

There was a paper from Luminit, with Joy as co-author, along these lines of embedding Covestro into plastic helmets etc. I think it was at SID two years ago.

Yes agree w Jody. , please share this information! Thank you .....

So did you post it? Thanks

If you can get the file to me, I can add it to the Wiki.

file too large, I tried :)

Please do😌😷

"How to Integrate Volume Holographic Optical Elements (vHOE) made with Bayfol® HX Film into Plastic Optical Parts" i just got this paper can i post it here? so others can use it :D

That usually happens after exposure. The more interesting information could be found reading article:"How to Integrate Volume Holographic Optical Elements (vHOE) made with Bayfol® HX Film into Plastic Optical Parts"

[quote="Ramunas (GEOLA)" post_id=72165 time=1603697485 user_id=7443]
Some tips for HX200 and its color tunability in the enclosed table below, good luck!
[/quote]

Thank you very much Ramunas, could you however detail a bit how to use this info in practice? Are these films which you are supposed to laminate onto the HX200 to achieve the wavelength shift? Before or after the exposure and curing of the HX200?

Thank you
Loic

Thank you for the informative research Ramunas. Do you have application notes available yet for the various laminates in the table you posted?