by holomaker » Sun Apr 28, 2019 10:39 am
John , a couple tips. The film changes as its exposed, causing movement , it will NOT work without using a glass backer.quite possibly the original plate I sent you may not even be thick enough...try using a very thick piece 1/2”? , this may help w your issues, if you get your ref angle and polarization correct , that will help also..
As I remember I sent you an AMBER led”tea light”, these are by far the best to use for any photo polymer. Your local wall-mart probably had them by the ten pack !
I can get you a sample to try of Zilux as I have some here...and meantime I’ll get you w Harlan and get a link
Here
Convestro is wonderful stuff but we need $8,000 for a roll..
( I’m good for $2000 of it !)
DB
John , a couple tips. The film changes as its exposed, causing movement , it will NOT work without using a glass backer.quite possibly the original plate I sent you may not even be thick enough...try using a very thick piece 1/2”? , this may help w your issues, if you get your ref angle and polarization correct , that will help also..
As I remember I sent you an AMBER led”tea light”, these are by far the best to use for any photo polymer. Your local wall-mart probably had them by the ten pack !
I can get you a sample to try of Zilux as I have some here...and meantime I’ll get you w Harlan and get a link
Here
Convestro is wonderful stuff but we need $8,000 for a roll..
( I’m good for $2000 of it !)
DB