Holographyforum.org / holowiki.org

Is C215M-50 lasers still available?

I already replace the power supply to 5v 10A 50w and power it direct to the controller let it warm up 1 hour pass it's hot (+-40C I think) (heatsinked) but still nothing. Then I take analog readings pin9-pin14 = 0.23v pin9-pin4 = 3.8v pin9-pin5 = 0.02v pin9-pin6 = 3.88v pin9-pin7 = 0v pin9-pin12 = 0...

It seems like my regulator doesn't function well.
I will update after I replace it.

Output from regulator is 5.00V 3.46A 17.43w

pin9 - pin14 = 0v
pin9 - pin4 = 3.9v
pin9 - pin5 = 0v
pin9 - pin6 = 4v
pin9 - pin7 = 0v
pin9 - pin12 = 0v
pin9 - pin15 = 0.1v

I also have an update on my emulsion and post process. This mean I am on the right track right?

https://youtu.be/DL03OajScHM

100:12:3 using green 5mw pointer 10 min min expose
http://img.dxcdn.com/productimages/sku_0091_1.jpg

I use 12v 20A DC switching power supply and a regulator that convert it in to 5v 10A S__24543282.jpg Yes, I also use multimeter to confirm the voltage S__24543283.jpg So the next thing I need to do is use the multimeter to check like what pluto said on the orange arrow - Connect to the analog interf...

I think it is on the correct side, because the orange light and other red square will block the way. The color arrangement of the wire is also same in the photo S__24485911.jpg Yes I also have a small jumper here. S__24485912.jpg controller and laser head is a bit hot but still can touch :? :? May b...

Laser just arrived yesterday. I connect it to power supply but no laser came out just orange light turn on, I wait around 5 minute but still notting.

Hello, I just ordered laser in the link it should be delivered to me around 5-10 February. Now I'm practiseing my coating skill (veil coating and will try mold coating as well). My emulsion look like a water should it be thicker? (100-12-3) And what good plate should look like before exp and after d...

Thanks alot Pluto
Can you give me more information about power supply does it has to be a specific one to work with the laser you gave me the link or which type I should looking for?