Here's a quick lil video of my current tables condition. This is a one beam transmission hologram,made using Fuji film D-19 developer and pyrochrome bleach
3 second exposuer using a Corning G-1000 laser .....................
i sense a small revolution is about to happen !
hologram of a bunch of junk on my table
-
- Posts: 273
- Joined: Thu Jan 08, 2015 2:28 am
hologram of a bunch of junk on my table
Looks good. How did you do the single beam - from above with a space filter or some other device? I've been doing my cave holos with two beams. After seeing your shot I'm thinking of going to one beam too.
hologram of a bunch of junk on my table
Dave, the Corning laser performed well! Congrats.
hologram of a bunch of junk on my table
Thanks Guys!
John i was thinking about you and this laser, as it runs on batteries for a good while using six 1.5 "D"batteries, making the whole unit quite portable, it's size is really smaller than a 1/2 a loaf of bread.a picture of the actual setup will follow (as soon as i clean things up a bit) Ill have a unit youll be interested in john quite soon.
Ron yes, i was quite suprised how long the coherents was on this unit, as im sure you guys can't see it, but I can see the black corner of my table thats easily 4 feet away
ill be doing a DCG test soon ........... so stay tuned !
in the last shot you can just make out the tiny head (smaller than a penny),being held in place with two screws to the way over kill heat sink
John i was thinking about you and this laser, as it runs on batteries for a good while using six 1.5 "D"batteries, making the whole unit quite portable, it's size is really smaller than a 1/2 a loaf of bread.a picture of the actual setup will follow (as soon as i clean things up a bit) Ill have a unit youll be interested in john quite soon.
Ron yes, i was quite suprised how long the coherents was on this unit, as im sure you guys can't see it, but I can see the black corner of my table thats easily 4 feet away
ill be doing a DCG test soon ........... so stay tuned !
in the last shot you can just make out the tiny head (smaller than a penny),being held in place with two screws to the way over kill heat sink
hologram of a bunch of junk on my table
Congratulations Dave for the new breakthrough.
I'm going to discuss here with specialists the new setup of the G-1000 laser since uses a direct IR laser frequency doubling, with a cavity providing SLM mode, very nice, I wonder now the arrangement for a 1260 nm FD possible to red or even blue range, have you the info if this unit use it for the white laser emission or rely on a red diode? I also wonder how to get same mode hopping free for image quality on red and blue components that may involve locked modes or SLM.
I'm going to discuss here with specialists the new setup of the G-1000 laser since uses a direct IR laser frequency doubling, with a cavity providing SLM mode, very nice, I wonder now the arrangement for a 1260 nm FD possible to red or even blue range, have you the info if this unit use it for the white laser emission or rely on a red diode? I also wonder how to get same mode hopping free for image quality on red and blue components that may involve locked modes or SLM.
hologram of a bunch of junk on my table
its just like a small window, looking into another room, so cool
hologram of a bunch of junk on my table
Allice in the wonderland:)
magic without SFX!
magic without SFX!