Coherent Genesis 532 nm 1 Watt lasers

Sell or buy stuff.
Forum rules
Finding new homes for holography-related items is encouraged. Even commercial enterprises with goods to offer are welcome as long as it is in the spirit of members helping members. If a for-sale post reads like an infomercial, though, you have probably crossed the line of acceptability.
142laser
Posts: 453
Joined: Wed Jan 07, 2015 10:14 am
Location: Tampa, FL

Coherent Genesis 532 nm 1 Watt lasers

Post by 142laser »

Sam has just tuned and tested a few Coherent Genesis 532-1000-SM laser systems, and they are ready for use. These lasers are designed to run single frequency. Here is a link to the data sheet:

https://content.coherent.com/legacy-ass ... 0517_3.pdf

These lasers require a trickle of tap water for cooling or a small chiller (not included) like an OASIS 150. A slow flow of tap water is fine. The laser will include a new DC power supply, software and manual copies. Sam has wired an analog input to change laser power with a DC voltage input of 0 to 5 Volts so a PC isn't really required. All the lasers are running around 11A for a watt on a 15A current limit-good diode condition. $4,500 with free shipping to the USA. 30 day exchange or money back warranty. Can also be set up and tested at say 500 mW if that is a better power level and the laser would last longer. 8-)

We have many lasers.....just ask! Phil and Sam (Sam's Laser FAQ)
142laser
Posts: 453
Joined: Wed Jan 07, 2015 10:14 am
Location: Tampa, FL

Re: Coherent Genesis 532 nm 1 Watt lasers

Post by 142laser »

I still have one 1 Watt laser left. Good condition, pots added to trim SLM if needed. I also have a tested OASIS chiller. $4,500 for the laser and $500 for the chiller. We also have a few 315M lasers and Lasos greens. Phil and Sam
Post Reply