ПФГ 03Ц

Russian Forum
ooleg
Posts: 7
Joined: Fri Apr 03, 2015 5:45 am

ПФГ 03Ц

Post by ooleg »

Здравствуйте!
Я заинтересован в следующий вопрос: в цветных отражающих голограмм как сделать баланс белого? На записи голограммы или освещения потом? Как видно после записи? Подсветка белым светом?

Спасобо!
BobH
Posts: 440
Joined: Tue Jan 06, 2015 10:26 pm
Location: Mesa, AZ

Re: ПФГ 03Ц

Post by BobH »

Intensity of each color beam can be adjusted to give proper results with a constant exposure time for each, or the exposure times for each color can be adjusted to give proper results with lasers running at maximum power.
ooleg
Posts: 7
Joined: Fri Apr 03, 2015 5:45 am

Re: ПФГ 03Ц

Post by ooleg »

10x BobH!
After exposition the hologram on PFG 03C and hemistry treatment and drying, white necoherent light use or coherent laser light with RGB lasers?
BobH
Posts: 440
Joined: Tue Jan 06, 2015 10:26 pm
Location: Mesa, AZ

Re: ПФГ 03Ц

Post by BobH »

White light use will be easy. Coherent RGB use will be difficult but possible, because you must match wavelength and angle for all colors at the same time.
ooleg
Posts: 7
Joined: Fri Apr 03, 2015 5:45 am

Re: ПФГ 03Ц

Post by ooleg »

BobH wrote:White light use will be easy. Coherent RGB use will be difficult but possible, because you must match wavelength and angle for all colors at the same time.
10x again BobH!
Post Reply