Can someone link me something to get me set up?Danny Bee wrote:pc to pc its free..... pc to land line (phone) or land line to pc it cost
Thanks,
Can someone link me something to get me set up?Danny Bee wrote:pc to pc its free..... pc to land line (phone) or land line to pc it cost
http://www.skype.com/download/skype/windows/Dutchelm05 wrote:I would be interestedCan someone link me something to get me set up?Danny Bee wrote:pc to pc its free..... pc to land line (phone) or land line to pc it cost
Thanks,
by dave battin on Wed Apr 02, 2008 9:39 am wrote:ok i need to ask a few things first.
how was this film made (method), and how old was the films age?
in processing what strenght is the kodak rapid fixer, and how long is the soak time?
what color laser(blue or green) was this DCG hologram made with ?
Dutchelm05 wrote:Thanks Dave,
OK here we go,
The method for this plate was
Mold process (1 ply tape)
1-12-100 film
The age is 24 hours
The fixer was 1:7 for paper kodak rapid fixer with hardener for 20 seconds
The rinse was only 1 minute (because of the lessen amount of AmDi)
IPAs 70/30% 10sec 90'F
30/70% 10sec 90'F
91% 10 sec 90'F
100% 110'F 1.5 minutes
The wavelength was 457nm (10 seconds)
Wow, that would be great. So many problem, do you think we'll have time???Danny Bee wrote:we all at lets talk holography are going to do a help Tony "dcg problems" cool hun so john and the rest of us lets get our skpe ready......
I ordered headset and will be here next week.JohnFP wrote:I can't guarantee it but I will try my best. Might be a busy weekend.
Let's us all know the time and day.
wow Tony .... this coin holo is great .....when do they go on sell ? i will buy one! coins are very hard to light ........... ive tried and tried to get a good coin hologram .......step to the front Tony i want to shake your hand and say well doneDutchelm05 wrote:Hey Dave, if you are out there, thanks for your advise.
I managed to reduce greenies on some to almost nothing by adjusting exposure time and expanding the beam.
I think next week I will try film thick using an idea Danny told me about.
On my 5X12 mold plates I will apply 2 thickness of tape on one side and 1 (or 0) plys on the other. This would make a wedge of film and I can figure out the optimal thickness.
How can I push this even more the the red?
Below was the results.