Fuji film for Denisyuk single beam
Posted: Sat May 15, 2010 3:00 am
I have working with fuji to make a good bright Denisyuk, and have come up with some bright holograms.
laser DPSS 532
exposer 3 sec
developer 1 min
bleach till clear then add one min
rince in h20
vitamin c bath 5% 2 mins
then air dry
Developer
potassium hydroxide 20
Ascorbic Acid 10g
metol 1g
Hydroquinune 1g
sodium Suphite 30g
h20 to make 1 L
bleach
Potassium Persulfate 10 grams
Sodium Bisulfate 10 grams
Potassium Bromide 20 grams
Cupric Bromide 1 gram
Metol (- add last ! -) 1 gram
h20 to make 1 L
2 things to note here about fuji it has a dye (cyan) in the gel which is not related to the silver.... it might be use as a blocker or a contrast mask.
also on the front of the film is a gel coating to which if the hologram is not paint on the back (if used as a display hologram) will give off noise but can be removed with household bleach ther by removing the noise. it also makes the hologram a bit cleaner a brighter by removing it.
laser DPSS 532
exposer 3 sec
developer 1 min
bleach till clear then add one min
rince in h20
vitamin c bath 5% 2 mins
then air dry
Developer
potassium hydroxide 20
Ascorbic Acid 10g
metol 1g
Hydroquinune 1g
sodium Suphite 30g
h20 to make 1 L
bleach
Potassium Persulfate 10 grams
Sodium Bisulfate 10 grams
Potassium Bromide 20 grams
Cupric Bromide 1 gram
Metol (- add last ! -) 1 gram
h20 to make 1 L
2 things to note here about fuji it has a dye (cyan) in the gel which is not related to the silver.... it might be use as a blocker or a contrast mask.
also on the front of the film is a gel coating to which if the hologram is not paint on the back (if used as a display hologram) will give off noise but can be removed with household bleach ther by removing the noise. it also makes the hologram a bit cleaner a brighter by removing it.