Super Stable Green SLM Laser-Awesome laser!

142laser · Post by **142laser** » Tue Sep 29, 2009 1:14 pm

Hi,
The EH Serias of Amoco lasers are very nice SLM 532 nm lasers that are excellent for holography. This Amoco laser has amazing beam quality and stability; it seems stable to a few hundreths of a mW out of 60 mW after warmup. I have added a nice fan-cooled Melcor heatsink; just unplug the cooling fan before you open the shutter; the laser can run fine for a time with no fan. Note that this laser has been tested by lasersam and then by me; it is awesome. Take a look at:

Like New Amoco SLM Laser Pictures:

http://www.repairfaq.org/sam/sale/am532ehh4.jpg

http://www.repairfaq.org/sam/sale/am532ehh1.jpg

http://www.repairfaq.org/sam/sale/am532ehh3.jpg

I also have an Adlas lab laser that is SLM and wil be posting pictures of that soon after testing is complete; it is very nice also. Your choice at $1,500 including shipping to the USA! International buyers pay actual shipping only-no markups.

Phil 142laser (813) 974-2378

142laser · Post by **142laser** » Wed Oct 28, 2009 4:05 pm

Hi all,
This laser is still available. These are rare to find now and this unit really runs like new and looks nearly new. It was over $26K and the output is SLM and dead stable with a perfect beam. If you buy it and you are not happy you get a full refund. I thought this would be gone fast; just the cooling kit was about $100 for me to add on. $1,500 is reasonable. Phil, 142laser

142laser · Post by **142laser** » Thu Dec 03, 2009 3:13 pm

Hey its is almost time for Santa and this super high quality SLM 50 mW green DPSS is still available doing 60 mW and so stable you will think your power meter is stuck. Everyone has 315M's and JDS Microgreens but this Amoco laser is cool and rare to find. Taks a look at the pictures; is is really like new and even better with the large heat sink and fan. Just uplug the fan for exposures; the laser runs fine for a long time with no fan.