coating plates

These are all of the old posts from the first two years of the forum. They are locked.
Updated: 2005-03-28 by HoloM (the god)
Locked
danny bruza

coating plates

Post by danny bruza »

well i did some coating plates with the danny method
and found that when i use thicker plastic as the release plate it comes out much nicer and very even...as far as i can tell by visual inspection...altho with the thicker plastic it takes time to slowly lift the release plate..so you dont mess it up.....this seem also a good way to coat for making your own silver plates and do good biggggggg plates 8x10 or 11x14....that sounds so good biggg plates
Locked