Zilux Photopolymer ...

Holography related topics.
holomaker
Posts: 772
Joined: Wed Jan 07, 2015 8:01 am

Zilux Photopolymer ...

Post by holomaker »

Here’s a test hologram I’ve made w Zilux photo polymer
Made using pL530 laser @75mw w 120 sec exposure.
Even though this film is slow, maybe slower than convestro, but an advantage of this film (so far), is its ability to allow light pass through.
Attachments
Zilux 530nm @75mw 120’ exposure
Zilux 530nm @75mw 120’ exposure
46783CB0-CF2C-44EA-A0D1-921E9118360A.jpeg (1020.09 KiB) Viewed 9184 times
holomaker
Posts: 772
Joined: Wed Jan 07, 2015 8:01 am

Re: Zilux Photopolymer ...

Post by holomaker »

Contact copy off a DCG H2, copy came out brighter than than the original.
Attachments
H3 copy off a DCG H2
H3 copy off a DCG H2
FA8D5E9B-898B-4BE9-A7EF-F971278D47C3.jpeg (1.4 MiB) Viewed 9133 times
holomaker
Posts: 772
Joined: Wed Jan 07, 2015 8:01 am

Re: Zilux Photopolymer ...

Post by holomaker »

75mw @120sec.....
Attachments
Simple Denisyuk, Zilux film test
Simple Denisyuk, Zilux film test
AE7207BE-8507-49B4-A7B5-878C8FD83FBE.jpeg (1.8 MiB) Viewed 9123 times
Sergio
Posts: 101
Joined: Tue Jan 20, 2015 12:25 pm

Re: Zilux Photopolymer ...

Post by Sergio »

Congratulations!
Very good result. The exposure is slow however, this is a thing to research. The most difficult thing is to achieve a high efficient master, maybe a DCG, SHSG or even on a pixelated digital image, the last one is the ideal for contact copy, but is very, very rare.
pluto
Posts: 99
Joined: Fri Feb 05, 2016 2:06 am

Re: Zilux Photopolymer ...

Post by pluto »

Curious what the sensitivity is like at 488nm vs 530nm, if you get a chance to test.

I want to ask what their pricing is like, but I see they require you to sign an NDA before even beginning product availability discussions :(
holomaker
Posts: 772
Joined: Wed Jan 07, 2015 8:01 am

Re: Zilux Photopolymer ...

Post by holomaker »

I think that was in the past, no waiver signed here!

Shortly I’ll be testing red and then blue ...

As I told Harlan, I think the initial clarity of the film make this good for doing reflection proximity copies..
holomaker
Posts: 772
Joined: Wed Jan 07, 2015 8:01 am

Re: Zilux Photopolymer ...

Post by holomaker »

To inquire about purchasing this film contact Harlan @

Email: Harlan@ziluxholography.com

Be sure to tell him Holomaker sent you !
Last edited by holomaker on Mon Apr 29, 2019 9:52 am, edited 1 time in total.
holomaker
Posts: 772
Joined: Wed Jan 07, 2015 8:01 am

Re: Zilux Photopolymer ...

Post by holomaker »

https://drive.google.com/file/d/1DV8TYf ... alyO7/view
here’s a video made by Zilux

In this video they were using green sensitive only film (red safe light), With a full color film I would use the amber leds ...
Holfocus

Re: Zilux Photopolymer ...

Post by Holfocus »

I have a few standard questions on this material since no performance specifications are shown on their website.
Did you measure the growth in diffraction efficiency during recording to assess the rate of development of refractive index modulation ?
Did you measure the shift in the reconstruction angle to assess the degree of shrinkage during recording ?
What was the mW/cm2 value at the recording plane during recording ?
Did you measure the final achieved diffraction efficiency ?
Did you try to multiplex additional images ?
What is the thickness of the recording material ?
Did you have to post expose the recorded hologram to stabilize the image, such as with a strobe flash lamp ?
Post Reply