- geola-polymer-2.jpg (244 KiB) Viewed 4285 times
Geola polymer
Re: Geola polymer
this is my test of Geola plymer using fiber lens to even out the color mix
Re: Geola polymer
i chose this object because it made a good hologram in silver fuji, and its much brighter done in the polymer
Re: Geola polymer
Nice work, can you detail a bit the recording conditions?
Thx
Thx
Re: Geola polymer
yes, the mix of the R+G beams are more of a greenish yellow .. because it has a higher red sensitivity. the beams was spread with a fiber negative lens with the curved side toward the beams and the flat side toward the plate angle of the beam was about 30% to the plate. expose was about 5 mins. you can see visually the change in the polymer as you expose it. then set out in the sun to bleach out the dyes
Re: Geola polymer
Nice, thank you