Geola polymer

Holography related topics.
dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Geola polymer

Post by dannybee » Mon Mar 30, 2020 7:38 pm

:D
geola-polymer-2.jpg
geola-polymer-2.jpg (244 KiB) Viewed 1498 times

dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Geola polymer

Post by dannybee » Mon Mar 30, 2020 7:41 pm

this is my test of Geola plymer using fiber lens to even out the color mix

dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Geola polymer

Post by dannybee » Mon Mar 30, 2020 7:47 pm

i chose this object because it made a good hologram in silver fuji, and its much brighter done in the polymer :P

Loic74
Posts: 39
Joined: Sat Aug 10, 2019 9:09 pm
Location: France

Re: Geola polymer

Post by Loic74 » Sun May 03, 2020 5:17 am

Nice work, can you detail a bit the recording conditions?
Thx

dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Geola polymer

Post by dannybee » Mon May 04, 2020 4:42 pm

yes, the mix of the R+G beams are more of a greenish yellow .. because it has a higher red sensitivity. the beams was spread with a fiber negative lens with the curved side toward the beams and the flat side toward the plate angle of the beam was about 30% to the plate. expose was about 5 mins. you can see visually the change in the polymer as you expose it. then set out in the sun to bleach out the dyes

Loic74
Posts: 39
Joined: Sat Aug 10, 2019 9:09 pm
Location: France

Re: Geola polymer

Post by Loic74 » Thu May 07, 2020 3:18 am

Nice, thank you

Wackhaus
Posts: 38
Joined: Sat Feb 13, 2016 3:45 pm

Re: Geola polymer

Post by Wackhaus » Mon Aug 03, 2020 9:16 pm

nice thank you very much
pocket full of holograms

Post Reply