Holographyforum.org / holowiki.org

Oh understood. Since the question is complex, let me spend some time for resume the answers for you guys then..

This may be of some interest, I did try to use clear optical adhesive it come in a roll to mount on glass , on a red 640nm reflection hologram and it took about 15 min it shifted to bright green, I'm wondering if you mount it to glass with adhesive first then let sit for 20min then expose, might be a possibility so it shifted 1 wave length

Some tips for HX200 and its color tunability in the enclosed table below, good luck!

Thank you for the informative research Ramunas. Do you have application notes available yet for the various laminates in the table you posted?

Ramunas (GEOLA) wrote: ↑Mon Oct 26, 2020 2:31 am Some tips for HX200 and its color tunability in the enclosed table below, good luck!

Thank you very much Ramunas, could you however detail a bit how to use this info in practice? Are these films which you are supposed to laminate onto the HX200 to achieve the wavelength shift? Before or after the exposure and curing of the HX200?

Thank you
Loic

That usually happens after exposure. The more interesting information could be found reading article:"How to Integrate Volume Holographic Optical Elements (vHOE) made with Bayfol® HX Film into Plastic Optical Parts"

"How to Integrate Volume Holographic Optical Elements (vHOE) made with Bayfol® HX Film into Plastic Optical Parts" i just got this paper can i post it here? so others can use it

Please do

file too large, I tried

If you can get the file to me, I can add it to the Wiki.