Polymer setup
Polymer setup
I'm addicted to news , I didn't watch the circus at dc , work on optic table instead.
- Attachments
-
- beam size.jpg (7.85 KiB) Viewed 2305 times
Re: Polymer setup
Because the 488 had a larger divergence that red that I used a +1 macro lens to lower it, because I need all that I can get from the 488, I can sacrifice 532 & 633 to get the proper mix, also took a friend advice to bend the mix 2x on the table to get a better gradual spread of the beam to have it more parallel light mix