Polymer setup

Holography related topics.
dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Polymer setup

Post by dannybee » Wed Feb 10, 2021 8:34 pm

I'm addicted to news , I didn't watch the circus at dc , work on optic table instead. :)
Attachments
beam size.jpg
beam size.jpg (7.85 KiB) Viewed 247 times

dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Polymer setup

Post by dannybee » Wed Feb 10, 2021 8:35 pm

table-2.jpg
Layout
table-2.jpg (119.13 KiB) Viewed 246 times

dannybee
Posts: 609
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Polymer setup

Post by dannybee » Wed Feb 10, 2021 8:44 pm

Because the 488 had a larger divergence that red that I used a +1 macro lens to lower it, because I need all that I can get from the 488, I can sacrifice 532 & 633 to get the proper mix, also took a friend advice to bend the mix 2x on the table to get a better gradual spread of the beam to have it more parallel light mix

Post Reply