Improvement on my project

Dichromated Gelatin.
Zeta
Posts: 42
Joined: Wed Jan 10, 2018 9:30 am

Re: Improvement on my project

Post by Zeta » Fri May 25, 2018 5:33 am

Finally done
S__26419227.jpg
S__26419227.jpg (1.14 MiB) Viewed 3015 times
https://youtu.be/_PnP9Djp7dA

S__26419228.jpg
S__26419228.jpg (926.96 KiB) Viewed 3015 times
https://youtu.be/AKsnOW2Bh7c

S__26419229.jpg
S__26419229.jpg (745.63 KiB) Viewed 3015 times

https://youtu.be/Ruwqx3yNf90

and

https://youtu.be/0sgQQLgujas

pluto
Posts: 94
Joined: Fri Feb 05, 2016 2:06 am

Re: Improvement on my project

Post by pluto » Fri May 25, 2018 1:15 pm

Nice work, what were your final steps for sealing the hologram?

Zeta
Posts: 42
Joined: Wed Jan 10, 2018 9:30 am

Re: Improvement on my project

Post by Zeta » Fri May 25, 2018 11:34 pm

I use clear epoxy for sealing my hologram.

I use this one 3$. It has extra working time 20min but not very clear and have super small bubbles in it and little yellow.

A4A76108-8287-4936-A847-F2A232378537.jpeg
1pack can seal 2 and a half 7x9 plate
A4A76108-8287-4936-A847-F2A232378537.jpeg (186.74 KiB) Viewed 3006 times

Post Reply