Colored material for holography VEColor

Silverhalide Emulsions / Chemistry.
Valery
Posts: 275
Joined: Fri Jan 09, 2015 12:42 pm
Location: Yaroslavl , Russia

Colored material for holography VEColor

Post by Valery »

Hi Din .
Mail is blocked for you.
The film came to you ?
I hope all is well.
Please let me know the results of testing.
Valery.
Din
Posts: 402
Joined: Thu Mar 12, 2015 4:47 pm

Re: Colored material for holography VEColor

Post by Din »

Yes, got it, thanks. We're busy now, but I'll test as soon as I can.
You mean my email? I don't know why mail is blocked. I didn't block it. Issues with server, probably.
Dinesh
Valery
Posts: 275
Joined: Fri Jan 09, 2015 12:42 pm
Location: Yaroslavl , Russia

Re: Colored material for holography VEColor

Post by Valery »

Hi Dinesh
You made color film test ?

Valery.
Din
Posts: 402
Joined: Thu Mar 12, 2015 4:47 pm

Re: Colored material for holography VEColor

Post by Din »

Next week. Will post results.

By the way, I use CWC2 + PBU for development. Is this OK?
Also, what are the sensitivities for the three colours (633, 535, 457).
Valery
Posts: 275
Joined: Fri Jan 09, 2015 12:42 pm
Location: Yaroslavl , Russia

Re: Colored material for holography VEColor

Post by Valery »

By the way, I use CWC2 + PBU for development. Is this OK?
Also, what are the sensitivities for the three colours (633, 535, 457).
It's hard to say, but I think that within 30-35 J / m. sq.
I work for 633, 532 and 488 nm, the sensitivity is about the same for each wavelength.
Normally I use the developer GP-2, but the SM-6 with whitening works well.

In any case, you need to select the exposure for each developer and the type of holograms.

When working with 15-20 mW and a spot of about 20 cm in diameter exposure was 20-30 seconds for the developer GP 2 (10 min time at 20- 22 ° C)
Din
Posts: 402
Joined: Thu Mar 12, 2015 4:47 pm

Re: Colored material for holography VEColor

Post by Din »

Valery,
I tried the film. I started with an exposure of 400 uJ for all three wavelengths . I got nothing. I kept increasing the exposure. At about 5 mJ, I got a dim image. All three wavelengths were present and about equal, but very dim. I then increased the exposure to 7 mJ, and got nothing again. Clearly, then, 7 mJ was overexposed. So, it looks like 5 mJ was the ideal exposure. But, if such a high exposure was necessary to get anything at all, I'm assuming that the grain size is very small. In this case, it may be necessary to use a physical developer. I used CWC2 and PBU. You mention GP-2 and SM-6, which, I believe, are physical developers.

I don't have the chemicals to make a physical developer, but I'll keep on testing.
Valery
Posts: 275
Joined: Fri Jan 09, 2015 12:42 pm
Location: Yaroslavl , Russia

Re: Colored material for holography VEColor

Post by Valery »

Hi
This is done on VEColor /
The developer of GP-2 with fixing. Laser 633 nm.
Attachments
SP.jpg
SP.jpg (74.71 KiB) Viewed 9276 times
Post Reply