Improvement on my project

Dichromated Gelatin.
Zeta
Posts: 42
Joined: Wed Jan 10, 2018 9:30 am

Re: Improvement on my project

Post by Zeta »

Finally done
S__26419227.jpg
S__26419227.jpg (1.14 MiB) Viewed 9860 times
https://youtu.be/_PnP9Djp7dA

S__26419228.jpg
S__26419228.jpg (926.96 KiB) Viewed 9860 times
https://youtu.be/AKsnOW2Bh7c

S__26419229.jpg
S__26419229.jpg (745.63 KiB) Viewed 9860 times

https://youtu.be/Ruwqx3yNf90

and

https://youtu.be/0sgQQLgujas
pluto
Posts: 99
Joined: Fri Feb 05, 2016 2:06 am

Re: Improvement on my project

Post by pluto »

Nice work, what were your final steps for sealing the hologram?
Zeta
Posts: 42
Joined: Wed Jan 10, 2018 9:30 am

Re: Improvement on my project

Post by Zeta »

I use clear epoxy for sealing my hologram.

I use this one 3$. It has extra working time 20min but not very clear and have super small bubbles in it and little yellow.

1pack can seal 2 and a half  7x9 plate
1pack can seal 2 and a half 7x9 plate
A4A76108-8287-4936-A847-F2A232378537.jpeg (186.74 KiB) Viewed 9851 times
Post Reply