Makes you want to try (although am sure it ain’t easy)
https://youtu.be/5IszBMYJ5Ks
Nice tutorial on YouTube
Re: Nice tutorial on YouTube
No, it isn't easy, but it's not too difficult either.
If you have suitable laser, access to a few chemicals and lots and lots of patience it can be done.
Results will improve over time, once you have a few holograms under your belt and have kept a log of your failures.
I don't bother with a fume cupboard, or anything like that.
I just use a plastic sheet over my kitchen work surface when I'm processing.
Patience and the ability to diagnose why a hologram has failed is key.
Steven.
If you have suitable laser, access to a few chemicals and lots and lots of patience it can be done.
Results will improve over time, once you have a few holograms under your belt and have kept a log of your failures.
I don't bother with a fume cupboard, or anything like that.
I just use a plastic sheet over my kitchen work surface when I'm processing.
Patience and the ability to diagnose why a hologram has failed is key.
Steven.
Success through failure - the amateur DCG holographer's path to enlightenment.
Re: Nice tutorial on YouTube
Thank you Steven, I'll definitely try sometime