Geola polymer

Holography related topics.
dannybee
Posts: 642
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Geola polymer

Post by dannybee »

:D
geola-polymer-2.jpg
geola-polymer-2.jpg (244 KiB) Viewed 4152 times
dannybee
Posts: 642
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Geola polymer

Post by dannybee »

this is my test of Geola plymer using fiber lens to even out the color mix
dannybee
Posts: 642
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Geola polymer

Post by dannybee »

i chose this object because it made a good hologram in silver fuji, and its much brighter done in the polymer :P
Loic74
Posts: 51
Joined: Sat Aug 10, 2019 9:09 pm
Location: France

Re: Geola polymer

Post by Loic74 »

Nice work, can you detail a bit the recording conditions?
Thx
dannybee
Posts: 642
Joined: Tue Jan 06, 2015 10:29 pm
Location: visalia
Contact:

Re: Geola polymer

Post by dannybee »

yes, the mix of the R+G beams are more of a greenish yellow .. because it has a higher red sensitivity. the beams was spread with a fiber negative lens with the curved side toward the beams and the flat side toward the plate angle of the beam was about 30% to the plate. expose was about 5 mins. you can see visually the change in the polymer as you expose it. then set out in the sun to bleach out the dyes
Loic74
Posts: 51
Joined: Sat Aug 10, 2019 9:09 pm
Location: France

Re: Geola polymer

Post by Loic74 »

Nice, thank you
Wackhaus
Posts: 40
Joined: Sat Feb 13, 2016 3:45 pm

Re: Geola polymer

Post by Wackhaus »

nice thank you very much
pocket full of holograms
Post Reply