Power Tool Safety

From HoloWiki - A Holography FAQ
Revision as of 22:54, 11 May 2013 by Jsfisher (talk | contribs) (1 revision)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Using power tools saftley is a very importent step that is often overlooked in the rush to get a project together. When in doubt read the manual!

More information can be found on the pages for specific tools.

  • Wear safety glasses! (Nothing is 3-D with only one eye!)
  • Wear hearing protection.
  • Don't wear gloves with drills or drill presses.
  • Don't cross cut with the fence on a table saw.
  • Use a vice in a drill press.
  • Check the underside of a cut before skill sawing.
  • Pay attention.
  • Don't ever put your body at risk. Stop. Make a jig.